What's New: November 2026

65 changes to SupplyWise this month, as written for the suppliers who use it.

17 November

Receive a big price change without changing the item's cost

When a supplier order's price is more than 30% away from an item's cost, the 'Big price change' box now has a third choice, 'Receive and keep cost', next to 'Receive and update cost'. Use it when the price on the order is a one-off or can't be changed (for example an order made in MYOB): the stock comes in and the item keeps its cost. You can still change the item's cost later, on the item or from the Item costs card on that order. That card now only offers a price on the order an item was last received on, so an old order can no longer put an item back to an old cost.

Receiving asks for a price before a $0 line goes on a MYOB bill

If you have "Create a bill in MYOB when stock is received" switched on, receiving a supplier order with a line priced at $0 now stops and asks first, instead of putting a $0 line on the MYOB bill. This mostly happens on draft orders made from Stock Alerts or Backorders for items with no last cost. On the receive screen the $0 lines are marked; enter the price per unit and receive, or choose "Bill at $0" if the item really is free (a sample, say). "Receive all" on an order with a $0 line opens the receive screen so you can check it. Receive stock (without an order) asks the same way. Nothing changes if you don't bill in MYOB on receipt.

Product costs can now follow your stock costs

A product's cost is what your margin reports use, and until now it only changed when someone typed a new one. In Inventory > Inventory Settings there is a new Costs section with two switches, both off unless you turn them on. 'Product costs follow stock costs' makes each product take its cost from its stock item, so when a stock cost changes (for example when you receive a supplier order at a new price) the product's cost and your margins on new orders follow. When you turn it on, SupplyWise shows how your product costs and stock costs compare today and asks which ones to keep where they differ. After that you can still change a cost on the product: the stock item takes it too. Orders already placed keep the cost they were sold at, and a product's price history shows 'from stock cost' when a cost followed its stock item. 'Made items take their cost from what went into them' sets the cost of an item you make with a recipe or a decant from the cost of the items you used, and undoing the make puts the old cost back.

Operators can view price lists but not change them

Team members with the Operator role (for example your sales reps) can now open Price Lists to look up a list's products, prices, discounts and customers, but they can no longer create, copy, delete or edit price lists. They can still send a quote from a price list. Owners and Members can change price lists exactly as before.

Hidden discounts now stay hidden on MYOB invoices

If your customers' discounts are hidden, invoices sent to MYOB (and QuickBooks) now also show just the price the customer is charged, with no list price or "discount applied" note, so an invoice or statement you send from MYOB never reveals the discount. Totals and GST are exactly the same as before. Invoices already in MYOB keep their old wording until the order is next re-synced.

Delivery Slips: clearer print menu, and separate slips per address

On the Orders page, select orders and open the Print menu: each option now says what it prints, and "Delivery Sheet" is now called "Delivery Slip" to match the page it prints. A Delivery Slip goes with the goods to be signed for, while the Delivery Summary is a one-page run sheet of every drop. If you select several orders for one customer that go to different delivery addresses, each address now gets its own Delivery Slip and its own row on the Delivery Summary. Before, they were merged under the first order's address.

Correct stock in SupplyWise without changing MYOB

If your stock adjustments are sent to MYOB, Record waste on the Inventory page and the Stock Level on an inventory item now have a "Send this change to MYOB" tick box, ticked by default. Untick it only when MYOB already has the right quantity and SupplyWise is the one that's wrong — SupplyWise's stock changes and MYOB is left alone, and Stock history marks the change "Not sent to MYOB". The box only shows for owners and managers, and only when Settings > Inventory sends stock adjustments to MYOB.

Supplier bills in Supplier Orders

Supplier bills are now received in the same place as your supplier orders, and the Incoming Stock item is gone from the Inventory menu. Bills from Xero, MYOB, QuickBooks, email and uploads that need you show at the top of the Open tab in Inventory → Supplier Orders, with a Receive or Review button, and every bill is listed under the Bills tab there. Their settings (where bills come from, item costs, suppliers that don't send stock) are under Inventory → Inventory Settings. Receiving a bill works exactly as before — matching items, changes and voids from your accounts, undo and item costs are all the same. Old links to Incoming Stock take you to the new place.

Daily stock check against MYOB, emailed to you

Inventory > Check against MYOB now has a Daily check. Turn it on, pick a time and the addresses to email, and every morning SupplyWise compares your stock with MYOB and emails you which items differ, marking the ones that are new since the day before. Each day's result is kept on the page for 60 days, so you can open any recent day's check. Choose Only email when something differs to skip the email on days everything matches. If the check can't run (for example MYOB is disconnected), you're emailed that too.

See what a customer has ordered before

Open any customer under Customers and choose the new Previously ordered tab (next to Favourites) to see every product they have bought: when they last ordered it, how many, the price they paid, how often and the total quantity. Click the star on a row to add that product to their Favourites. If you moved to SupplyWise from another system, we can load their purchase history from it too, so your team can see what they used to order there (it shows as Imported and does not create any orders).

See a product's price history

Open any product (Products, then click the product) and press Show price history at the bottom of the page. Prices charged lists what each customer paid on every order, with a chart, and you can pick one customer to see how their price has moved over time. Price changes shows every change to the product's wholesale price, retail price, cost and price list prices, with who made it and when. Price changes are recorded from today onwards.

Fractional stock shows exactly in Inventory

Stock and par levels can be part of a unit — for example 0.52 of an IBC after decanting — and Inventory now shows them exactly, to up to 3 decimal places (1.424 used to show as 1.42). Whole numbers show without decimals: 3 instead of 3.00. Stock history and the Undo dialogs show the same exact figures. You can type fractional stock and par levels anywhere you edit them, including the Stock Level box on a product; more than 3 decimal places is refused with a message.

Check your stock against MYOB

If you're connected to MYOB, Inventory now has a Check against MYOB button. It lists every item whose stock in SupplyWise differs from MYOB's on-hand quantity (matched by SKU), allowing for orders that aren't in MYOB yet, and says why an item may differ when SupplyWise knows the reason (for example an adjustment MYOB hasn't received yet). It also lists MYOB items with no matching product and products MYOB has no item for. It only reads MYOB and changes nothing, and you can export the list to CSV. To correct an item, do a stock count or adjustment.

Edit more right from the Orders and Inventory tables

You can now change more without leaving the list. On the Orders page, click an order's Shipping Status badge to change it (for example from Pending to Shipped), or click its Category to pick or type one. It works the same as on the order itself: Pickup Completed asks who picked it up, Ready for Pickup offers to email the customer, and Cancelled asks you to confirm. On the Inventory page, click an item's Storage Area to pick or type one, or its SKU to edit it (unless the SKU comes from a linked product — change it on the product). Cost, stock and par level were already editable by clicking them.

Bills SupplyWise creates in MYOB file themselves

When SupplyWise creates a bill in MYOB for stock you received, that bill no longer waits in Incoming Stock — it is filed by itself, even when its price is very different from the item's cost. If a price received is more than 30% away from the item's cost, the cost is left as it was and the supplier order shows it under Item costs; press Update item cost there when the new price is right.

Stock Alerts: see what's below par, print it, and turn it into supplier orders

With Purchasing on, there's a new Inventory > Stock Alerts page. It lists every stock item at or below its par level across all your suppliers, counting what's already on order and what customers are waiting for on backorders. Each line shows on hand, backordered, on order, par, how far short you are and a suggested order quantity (the item's reorder quantity, else enough to get back to par). Print it as a stock alert sheet grouped by supplier, export it, or tick the lines you want, adjust the quantities and click Create supplier orders: you get one draft order per supplier, using each item's last cost and buy unit. Nothing is sent until you open each draft and send it. Set par levels on the Inventory page.

See every quote you've sent

Every price quote you send is now kept on the customer. Open a wholesale customer and choose the new Quotes tab to see who sent each quote, when, who it went to, how long it was valid for and the price of every product on it — including where you typed over their usual price. Download the exact PDF they received with the PDF button. Quotes sent from the mobile app are listed too.

Order backordered items from your supplier

On Orders > Backorders, the Waiting for stock tab now has an Order from supplier button. Tick the backorders you want to order and click it: you'll see, for each of your suppliers, what will be ordered (what your customers are waiting on, less what you already have in stock or on an order, after any other customers waiting for the same item), in the supplier's buying units. For an item with no supplier yet, you can choose a supplier for that order right there; set the product's supplier to make it stick. Create draft orders adds them to that supplier's draft order, or starts a new one. The orders stay drafts until you check them and send them, so nothing goes to your supplier (or to MYOB) until you do. Backorders are also harder to miss: an amber mark beside an order's number, on the Orders list and at the top of the order itself, shows it still owes backordered items (hover it to see how many, and click it to open them), the Backorders button on the Orders page turns amber with the count, and Backorders now has its own place in the sidebar under Orders.

Operators can now see Price Lists

Team members with the Operator role now get Price Lists in the sidebar, so they can look up and work with your price lists without an owner or member. Visibility Groups (customer groups) stay under Customers → Visibility Groups, where operators can already open them. Operators connected through the SupplyWise AI assistant (MCP) get the matching price list tools too.

Choose whether customers see their price-list discounts

When a customer's price list puts a product below its base price, their invoices, order emails, orders, cart and store show the base price crossed out and the discount %. You can now hide that, so customers only ever see the price they pay. Ask SupplyWise support to turn off Show Discounts to Customers under Settings > Features. Prices charged, promo-code discounts, your own dashboard and your Xero/MYOB invoices are unchanged.

Year-on-year analytics now compare the same weekdays

On Analytics > Reports > Order Analytics, with Daily or Weekly selected, the Last Year bars and the vs Last Year cards now compare against the same weekdays 52 weeks earlier, so a Monday–Sunday week is compared with a Monday–Sunday week. Before, they used the same calendar dates a year earlier, which fall on different weekdays and made busy and quiet days line up wrongly. Monthly still compares the same calendar months.

Undo a recipe make-up

Made a recipe by mistake, or need to redo one? Go to Inventory > Stock history and click Undo make-up on any Recipe Made row of that make-up. It shows what comes back off the made item and what goes back into each ingredient, with the stock level each one ends up at, before you confirm. The make-up stays in the history marked Undone, with a Make-up Undone entry next to it. If you send stock adjustments to MYOB, a reversing adjustment goes to MYOB only when the original reached MYOB; if it never got there (for example MYOB refused it), nothing is sent and it is marked as having nothing to send. A make-up can be undone once. Make-ups recorded before today can be undone only if they were queued for MYOB at the time.

16 November

Receive supplier orders faster

Supplier Orders has three tabs now — Open, Waiting on invoice and Done — and every order shows whether it has arrived and whether it's billed. Press Receive all on an order (or tick several) to receive everything in one go, or Receive some… for a part delivery, where you can also set the day it arrived and correct the price per unit. Goods turned up with no order? Use Receive stock. Made a mistake? Open the order and press Undo on the delivery (not available once deliveries are billed in MYOB). If you use MYOB, the setting for billing received orders is now a single switch under Inventory → Incoming Stock → Settings.

Bill each delivery in MYOB

If you use MYOB, you can now choose what happens there when you receive a supplier order in SupplyWise. Under Inventory → Incoming Stock → Settings → Supplier orders there are three choices. "Nothing" leaves the MYOB purchase order open for your accounts team to change to a bill when the supplier's invoice arrives. "Bill it once everything has arrived" turns it into one bill when the whole order has been received or closed short (this is the switch that was there before). The new one, "Bill each delivery", adds a bill to MYOB every time you receive goods, so MYOB's stock is right the same day, even for a part delivery. Whatever is still to come stays on a MYOB purchase order. Those bills have no supplier invoice number yet: your accounts team will find the ones that still need one under Inventory → Supplier Orders → "Waiting on invoice", and each supplier order's page lists its MYOB bills. Once they add the number to the bill in MYOB it leaves the list by itself, within about half an hour or overnight. Nothing changes unless you pick a different choice and press Save: your current setting is kept.

Choose whether receiving a supplier order creates the bill in MYOB

If MYOB is connected, receiving everything on a supplier order no longer turns the MYOB purchase order into a bill by itself. The MYOB order now stays open, so your accounts team can change it to a bill when the supplier's invoice arrives. If you'd rather SupplyWise made the bill for you as soon as an order is fully received (or closed short), turn on "Bill supplier orders in MYOB when they're received" under Inventory → Incoming Stock → Settings → Supplier orders. It is off by default. Orders that were already billed stay billed.

Undo a decant from Stock history

Made a decant by mistake? You can now undo it. Go to Inventory and click "Stock history", find the decant (it has a blue "Decanted" badge; pick the item from the dropdown to narrow the list), and click "Undo decant". The window shows every item's stock level now and after the undo, and warns you if one would go below zero. Confirm, and the stock goes back to how it was before the decant. The decant stays in Stock history marked "Undone", with a "Decant Undone" entry next to it, so you always have the full record. If the decant was sent to MYOB, a reversing stock adjustment is sent to MYOB too. A decant can only be undone once.

Search item pickers by code: exact matches come first

Typing a SKU or code into a drop-down picker now finds that item straight away. In Inventory → Decant / repack (and the other pickers that list items, customers, suppliers or accounts), an exact code like DB020 is listed first, then items whose code or name starts with what you typed, then ones that contain it. Unrelated items no longer show up just because they share a few letters.

Recipes: SKUs on the item you make

Inventory → Recipes now shows the SKU of the item each recipe makes, and you can search recipes by SKU. The Make Recipe window shows it too, next to the ingredients' SKUs.

Backorders from your store and the mobile app

If you use Purchasing, out-of-stock items can now be ordered from your wholesale store and the SupplyWise mobile app, not just from the order editor. Turn it on in Inventory → Incoming Stock → Settings, under Backorders in the store and app: choose Your staff and sales reps (when they order for a customer) or Everyone, including customers. It's off until you choose. Products that track stock, don't keep selling when out of stock and use one stock item then show a Backorder button instead of Sold out. At checkout the order is invoiced for what's in stock now; the rest is backordered, shown on the order and invoice as Backordered and not charged, and waits on Purchasing → Backorders until the stock arrives and you create its order. Customers who pay up front at checkout can't backorder yet, and customers can't change or cancel a backorder themselves — you do that from Purchasing → Backorders.

Bills already received through a supplier order are filed automatically

When you receive a supplier order (PO) in SupplyWise and its bill then arrives from MYOB, Xero or QuickBooks, the bill no longer waits in Inventory → Incoming Stock → Ready for you to receive the same goods again. If every stock line on the bill already came in when you received the order, the bill is filed automatically: no stock is added a second time, and item costs update from the bill if Update item cost from bills is on. It works the other way round too: a bill that arrived first is filed as soon as you receive its order. You'll find these bills under Received, marked Filed automatically — stock came in on PO-…, and you can still undo one within 7 days. Bills with anything else to check (a line the order didn't bring in, more than you received, a big price change, an unmatched line) stay in Ready as before.

Unit numbers now print on delivery slips, picking slips and invoices

When a delivery address has a unit, level or shop number (the second address line), it now prints on the Delivery Slip, the Delivery Summary, picking slips and invoices. Before, only the street line printed, so "Unit 2/5 Weedon Road" came out as "5 Weedon Road". A plain unit number shows as "2/5 Weedon Road"; anything longer, like "Unit 2" or "Level 3", prints on its own line under the street.

New products can start with Keep selling off

You can now choose whether new products keep selling when they run out of stock. Go to Inventory → Incoming Stock → Settings and use the New products keep selling when out of stock switch. Turn it off and every product you add from then on (including from a product import) starts with Keep selling when out of stock unticked, as does a product when you first turn on its stock tracking, so it shows as out of stock once its tracked stock runs out. Your staff can still backorder short items on an order. Products you already have aren't changed: tick or untick Keep selling when out of stock on each product's stock tracking. Leave the switch on and nothing changes.

Send a quote from the mobile app

Your team can now send a customer a price quote from the SupplyWise mobile app. In the app, open the Order tab, find the customer and tap Quote. Pick the products, type your own price on any line if you like, choose who to email and send. The PDF is emailed (there is no preview on the phone), and you can save the prices you changed to that customer's price list.

Purchasing: a default message for supplier order emails

You can now save a default message for the emails you send your suppliers with a purchase order. Open a supplier order, press Send, type your message and choose "Save as the default message". From then on it is filled in every time you send an order, and you can still change it before sending.

Decant: see SKUs and take from several items at once

The Decant / repack window now shows each item's SKU next to its name, and you can search for an item by its SKU. You can also take from more than one item in one decant, for example concentrate and water into a premix. Go to Inventory and click "Decant / repack", choose the first item to take from, then click "Add another item to take from" for each extra item and enter how much of it is used. Each item's stock level is shown before and after, and you still get a warning if any of them would go below zero. Every stock level updates in one step and the whole decant shows in Stock history. If "Send stock adjustments to MYOB" is on, it goes to MYOB as one adjustment.

Receiving a supplier order now creates the bill in MYOB

If MYOB is connected, receiving everything on a supplier order under Purchasing → Supplier orders now turns the matching MYOB purchase order into a bill for you, for the quantities you received. Closing an order short after part of it arrived bills what came. Your accounts team no longer has to convert the order in MYOB by hand. A part delivery leaves the MYOB order open until the rest arrives. The order's MYOB card shows "Billed in MYOB" once it's done. When that bill comes back into Incoming stock it is already linked to the order, so the stock isn't added twice.

Quotes: type your own prices and save them to the customer's price list

When you send a customer a quote (Customers → a wholesale customer → Send quote), each product you tick now has a price box filled in with the customer's current price. Type over it to quote your own price; changed prices are highlighted and can be reset with one click, and the PDF shows the prices you typed. On the last step, tick "Save these prices to the customer's price list" and, once the quote is emailed, the changed prices are saved to that customer's own price list (a new one named after them is created if they don't have one). A price list shared with other customers is never changed. If another of the customer's price lists is cheaper for a product, they keep paying the lower price, and we tell you how many. You can also start a quote from a price list: open it under Price Lists and click Send quote to quote its products to one of its customers.

One-off items: type the description on each order line

For one-off items you sell under a single catch-all product (like a "Miscellaneous" SKU), you can now type what was sold on each order line. Open the product, turn on "Type a description on each order line" and save. When you add that product to an order, a "Describe this item" box appears under its name: what you type prints on the invoice, picking and delivery slips, emails and PDFs, and goes to MYOB, Xero and QuickBooks as the line's description. Leave it blank and the product's name is used, as before. Each time you add the product it gets its own line, so one order can hold several different one-off items. Supplier orders (Purchasing) can also have their line descriptions changed: click the pencil next to an item's name on the order.

Incoming stock is now a searchable table, with bulk 'Mark received' and an option to skip credit notes

Inventory > Incoming stock now lists your bills in a table with a search box: type a supplier, bill or PO number, date or amount to find a bill, and every bill on a tab is listed without pressing Show more. If some bills are for goods already counted in your stock (for example bills entered before your opening stock was set), tick them on the Ready or Needs mapping tab and press 'Mark received — stock already in': they move to Received without changing any stock levels or costs. And if you handle supplier returns as stock adjustments, turn on 'Skip supplier credit notes' in Incoming stock > Settings so new credit notes go straight to Ignored.

15 November

Order Analytics now counts the first day of your date range

Analytics > Order Analytics now includes every day in the range you pick. Before, the first day was left out of the totals and chart (and wasn't counted in the previous period either), and the Today and Yesterday options showed nothing. Those now show that day's figures. In the weekly Sales vs Last Year chart, each last-year bar now covers the same days as the bar beside it, so the first and last weeks compare like with like.

Incoming stock: see and remove suppliers that don't send stock

Inventory > Incoming stock > Settings now lists every supplier whose bills you've marked as never containing stock (power, rent, fuel and so on), including suppliers that are only in MYOB or Xero. Their bills go straight to the Ignored tab. Search the list, and press Remove on any supplier whose new bills you want back in your inbox.

14 November

Incoming stock now reads your MYOB bills

If you use MYOB, Inventory > Incoming Stock now brings in your supplier bills from MYOB every 30 minutes (switch MYOB on as a source in Incoming Stock > Settings). A bill made from a purchase order you have already received only updates your costs, so stock isn't counted twice, and quantities on MYOB item lines are taken as they are rather than multiplied by pack sizes in the item name.

Report tabs, clearer payment errors and a few fixes

The tabs on Analytics → Reports and on a customer's page now switch straight away when you click them. Before, on some connections a click could do nothing. When a card payment fails because the payment provider couldn't verify it, rather than the bank declining it, you and your customer now see "We couldn't verify this payment" with a suggestion to try again or use another method, instead of a confusing decline message. Removing an invited user from a customer, or changing a customer user's role, now shows an error message if it fails. Your wholesale customers no longer get stuck going back and forth between your store and the request-access page.

Recipes: see what a make uses before you make it

Inventory > Recipes > Make Recipe now shows each ingredient: how much the make uses, what you have in stock and what will be left, and warns you before anything goes below zero. Recipes also accept small quantities (for example 0.005 of a 1000L container for a 5L pack), item pickers show the SKU next to each name so similar items are easy to tell apart, and a recipe whose ingredient has been archived no longer stops the Recipes page from loading.

12 November

Bank payins: an Outstanding tab shows only the ones that need you

Payments → Payins now opens on an Outstanding tab: only the payins still waiting on you — ones to match to orders, assign to a venue, finish allocating, or that need support. Everything already matched, paid out or refunded is on the All tab. The Status column is now the first column, so you can see at a glance where each payin is at.

11 November

Customer POs: one menu item for everyone, and a count on the All tab

The purchase orders your customers email you now live under Customer POs, directly below Orders in the sidebar, with the number waiting for review beside it. It used to be called Purchase Orders for some businesses and sit under Orders for others, and could jump between the two as the page loaded. On the Customer POs page the All tab now shows how many POs it holds, and when nothing is waiting in Needs review you see a See all button that takes you straight to them instead of an empty list.

Edit any customer login's name

You can now fix the name on any of a customer's logins, including a login they share across several businesses (like a general orders@ email still showing an old staff member's name). Open the customer, go to Users and click the pencil next to the person. The new name is saved to their login, so it shows everywhere they sign in and stays put next time they log in. First and last name are both required.

Website editor tidies its list of changes automatically

On the Website page, a change you publish or discard now moves to Archived straight away, and any change nobody has touched for 3 days is archived too, so the list only shows what you are still working on. Nothing is deleted: turn on Archived above the list to see them all, and send a message in an archived change to bring it back.

Have you tried? suggestions move to the cart and a Suggested tab

If Have you tried? is switched on for your store, your customers no longer see the suggestions above your products. They now appear at the bottom of the cart, under the order, and in a Suggested tab next to Favourites and Reorder (shown only when that customer has suggestions). Each suggestion's reason now only refers to what that customer already orders, never to how many other venues order it.

Customer POs: a faster review screen that learns each customer's orders

When a customer emails you a purchase order, open it from your list of customer purchase orders (Customer POs in the sidebar) and you will now see the PO itself on the left and the order it becomes on the right: each line shows what the customer asked for, the product and quantity it maps to (including pack conversions such as a carton of 8), any required options, your price and the line total, with the order total at the bottom. Each line says where its match came from (remembered from a PO you approved before, a learned rule, or an AI guess) and warns you when the price on the PO differs from yours. Your prices are never changed. Approve stays disabled, with the reason shown, until every line has a product and all required options are chosen. Orders written in the body of an email, with no PDF attached, are now read too, and emails that are not orders (such as replies) are kept under the Not orders tab instead of cluttering your list. Every PO you approve teaches SupplyWise how to read that customer's next one. To see what it has learned, open the customer and look for the Customer POs card on their Details tab: you can edit or delete their rules, add your own, and forget any remembered line that is wrong. On the same card you can switch on auto-approve for a customer you trust. It is off for everyone unless you turn it on, and even then a PO is only approved automatically when every line has been approved the same way at least twice and the prices match. Auto-approved orders are marked on the order page and stay in Needs review until someone clicks Looks good. Working through several POs is quicker too. When more are waiting in Needs review, the button at the bottom of a PO reads Approve & next: it creates the order, shows you its order number with a View link, and opens the next PO waiting (the oldest first), with a count of how many are left. Use the small arrow beside it to approve and go straight to the order instead. On the Needs review tab you can tick the POs marked All clear (or tick the box at the top to select them all) and click Approve to create all of their orders at once. You see the list before anything happens, and any PO that cannot be approved stays ticked with the reason shown. The Customer POs card on a customer's Details tab now shows as soon as you receive POs, so you can add a rule for a customer before their first PO arrives.

Customer Groups are now called Visibility Groups

What used to be called Customer Groups is now called Visibility Groups, because that is what they do: a customer only sees the products that are in one of their visibility groups. You will find them in the same place, under Customers > Visibility Groups, and on the product and customer forms. Nothing about how they work has changed, and all your existing groups, their customers and products are exactly as they were.

10 November

Settings shows when a business has no users

Settings → Users now shows an amber warning instead of a green tick when nobody can log in to your business, and lists it under "Needs your attention" on the Settings page. Invite a user from Settings → Users to clear it. Users still shows an hourglass while an invite is waiting to be accepted.

Add a new wholesale customer straight from New order

Taking an order from a business that isn't set up yet? On the Orders page, click New order, then New wholesale customer. Enter the business name (email, phone and delivery address are optional), choose their customer groups and price lists, and click Add and start order — you go straight into the new order with their pricing applied. No login is created and nothing is emailed; you can invite their staff, set payment terms and add an ABN from the customer's page later.

Start a credit note from the Orders page

There is now a "New credit note" button on the Orders page, next to "New order". Search for the customer by name, email or phone, pick them, and you go straight to the credit note form — no need to open the customer first.

Send customers a price quote

Open any wholesale customer and click Send quote to put together a PDF of their prices — exactly what they see when they log in to order, including their price lists. Pick the products (search, filter by category or favourites, and select everything you've found in one click), choose who to email it to from the addresses already on their account or type your own, add a note and how long the prices are valid, then preview the PDF. Send it from SupplyWise, or just download it and send it yourself.

Sales reps and your team can order for customers from your wholesale store

Sales reps now have a login email. Add it under Customers > Sales Reps and we email the rep to say they can sign in. Once they do, on the web or in the SupplyWise app, they see "Your customers": every customer you've given them as their sales rep. They can open one and order for them just as the customer would. Anyone on your team can do the same for any of your wholesale customers. Use New Order > In Their Store on a customer's page, Order for a customer on your wholesale store's Accounts page, or the new Order tab in the app. You only see your own store and your own orders with that customer, never their other suppliers. A banner shows whose account you're in, and every order is marked as placed on the customer's behalf. You can pay with the customer's saved card, PayID or bank transfer, but you can't add or remove their card or take a direct debit.

Customers who deliver to more than one site can choose the address on every order

Some wholesale customers order for several locations. They can now turn on "Deliver to more than one address" in their Venue settings and save a list of named addresses. Once it's on, their checkout (web and app) no longer fills in an address — they pick one of their saved addresses, a recently used one, or enter a new one on every order, so orders stop going to the wrong site by default. Nothing changes for customers who leave it off. When you create or edit an order for one of these customers, their saved addresses appear by name under "Use a previous address".

9 November

Edit a customer user's name

When a customer shares one login between staff (for example ordering@business.com.au) and the person using it changes, you can now update the name on it. Go to Customers, open the customer, choose the Users tab and click the pencil (Edit name) button next to the person. Your customers can do the same from the Users page in their own settings. A login that is also used with another business can only be renamed by the person themselves. Past orders keep the name they were placed under.

7 November

Online shop checkout: tapping the next step now moves your customer on

In your online shop's card checkout, customers often tapped the heading of the next step (such as Pickup or Payment) and nothing happened. Tapping it now works like the Continue button: it moves them on, or tells them what they still need to fill in.

6 November

Minimum delivery days can now skip weekends

You can now count your minimum days before delivery as business days, so Saturday and Sunday don't count. Until now every day counted: with 3 days' notice, an order placed on a Friday could be delivered on the Monday. Turn on "Count business days only" under Settings → Delivery Schedule, next to Minimum Days Before Delivery, to apply it to everyone. To apply it to one customer, open the customer and use "Own minimum days before delivery" in the "Delivery timing for this customer" card. With it on, 3 days from a Friday morning order is Wednesday, and an order placed after your cut-off or over the weekend counts from the next weekday (so Thursday). Products with their own minimum days are counted the same way. It's off unless you turn it on, so nothing changes for you otherwise.

Payment method settings now apply in the mobile app

If you have switched off a payment method for wholesale customers (Credit Card, Direct Debit, PayID or Bank Transfer), it is now hidden in the SupplyWise mobile app too, not just on the website. Previously customers paying an order in the app could still see and choose a method you had turned off. To change which methods your wholesale customers can use, email support@supplywise.com.au.

Free shipping on new shipping profiles is easier to find

When you add a Fixed Price shipping profile (Settings → Shipping Profiles → Add), the Enable Free Shipping switch is now always shown. It used to stay hidden until you typed in a shipping price, which made it look as though new profiles couldn't offer free shipping. While the price is $0 the switch is greyed out with a note; enter your shipping price and you can switch it on and set the order amount that qualifies for free shipping.

4 November

Connect QuickBooks Online

You can now connect SupplyWise to QuickBooks Online, alongside Xero and MYOB. Go to Settings > Integrations > QuickBooks Online and click "Connect QuickBooks", then sign in to QuickBooks and choose your company. From then on, every new order is sent to QuickBooks as an invoice, credit notes go across as credit memos, and payments your customers make are recorded against their invoices. Orders from before you connect are not sent. Payments recorded in QuickBooks by your bookkeeper come back to SupplyWise and mark the order as paid. An order goes to an existing QuickBooks customer only if the name matches exactly, otherwise a new customer is created. If a customer goes by a slightly different name in QuickBooks, link them on their customer page before their next order. When you connect, SupplyWise creates a bank account in QuickBooks called "SupplyWise Clearing". Customer payments collected through SupplyWise go into it first, because the money reaches you later in a payout that covers many orders. When a payout is sent, SupplyWise moves the payout amount from SupplyWise Clearing into your payout bank account (so it matches the deposit in your bank feed) and records the fees as an expense, so each payout clears what it paid out. Any balance left is money collected but not yet paid out. Choose your payout bank account in the QuickBooks Online settings - payouts aren't recorded until you do. You can also choose which income accounts sales, shipping and card surcharges post to, and the expense account for payout fees. If you also raise invoices directly in QuickBooks, turn on "Let QuickBooks number my invoices" - ideally before your first sync, because QuickBooks carries on from the last invoice or credit note number used in your company. Each order page shows a QuickBooks panel with its sync status and a Re-sync button, and the Orders table has a QuickBooks Status column.

3 November

Xero settings now warn when an account code won't work

Under Settings, Integrations, Xero Accounting, each account code now shows the name of the account it points to in your Xero chart of accounts. If a code is missing from your chart, archived, or the wrong type of account, you will see a warning under it explaining what that means. Before, a bad code only showed up later as an invoice that failed to sync. It is worth opening this page once to check your codes, especially Shipping and Default Product, which are set to 200 when you first connect Xero.

Re-order your last order in one tap from the Reorder tab

Your wholesale customers can now repeat their last order in one tap. On the Reorder tab of your store, on the web and in the mobile app, they will see their last order with an Add to cart button, which fills the cart with the same items and quantities. Before, they had to add those items one by one unless their cart was empty. Items that are no longer available are left out and named, and they can still change quantities before checking out. Nothing to set up.

All months

See SupplyWise in action

Book a demo and we'll show you how SupplyWise takes the admin out of your wholesale ordering.

Book a Demo