What's New: August 2026

87 changes to SupplyWise this month, as written for the suppliers who use it.

31 August

Daily delivery email no longer attaches the Delivery Matrix PDF

Your Daily Delivery Email now arrives with three PDFs instead of four: the picking slips, the daily items report and the pack list. The Delivery Matrix PDF is no longer attached, since the pack list covers the same day's packing in a format that prints better. Nothing else about the email changes. The Delivery Matrix report itself is unchanged and still available any time under Analytics, then Reports, in the Delivery Matrix tab, where you can pick any date and print it.

New packing reports: Delivery Matrix and Pack List

There are two new reports for portioning and packing a day's deliveries. The Delivery Matrix shows your products as rows and each customer's order as a column: read across a row to see the total to prepare of each product, and down a column to see everything a single customer gets. The Pack List shows the same information one product at a time: each product's total to prepare, with a tick-off line underneath for every customer order it goes into. Find both under Analytics, then Reports, in the new Delivery Matrix and Pack List tabs, where you can pick any date. If you use the Daily Delivery Email, both now arrive as extra PDF attachments alongside your picking slips and daily items, laid out for printing. The Daily Items report also now lists products in your catalogue's sort order, matching your picking slips, instead of by quantity.

Orders list pages all the way through again

On the Orders screen, the next page arrow could grey out after only a few pages and refuse to go any further, even though the counter still said there were hundreds of pages left. It depended on the Rows per page setting at the bottom of the table: on 10 rows per page it stopped at page 3, and on 50 or 100 it would not move off page 1 — which is why the same account could page normally on one computer and get stuck on another. You can now page through the whole list on any Rows per page setting. The page counter is also honest about where the list ends: the Orders screen shows the last six months of orders, so once you reach the final page the count corrects itself to the real number of pages instead of counting every order you have ever raised.

30 August

Product images are optimised automatically when you upload them

When you add a photo to a product, category, business profile or the media library, we now resize and compress it for you as it uploads. A large photo straight off a phone or out of a design tool is often ten megabytes; after this it is usually well under one, with no visible difference anywhere it is shown. Uploads finish faster and your storefront pages load quicker for customers. Logos and other images with a transparent background keep their transparency. Nothing changes about how you upload — just drag and drop as usual. Files over 25MB are now turned away with a message asking you to resize first, instead of failing silently.

Audit log delta now shows just the fields that changed

In Settings > Audit Log, clicking the view button on a row used to open a side-by-side dump of the entire record before and after the change, so a single price or quantity edit was buried in hundreds of unchanged lines. For changes recorded from now on, that view shows only the fields that actually changed, with their before and after values, marked 'Changed fields only'. Edits to an order list just the order lines that moved, along with the totals that shifted as a result. Entries recorded before this change still open in the old full-record view until they drop off the 30 day audit history.

Daily delivery emails now retry instead of silently skipping a day

If your daily delivery email can't be delivered — for example an unusually large batch of picking slips, or a rejection from the mail provider — SupplyWise now notices, records the problem in your error log, and automatically tries once more, instead of treating the day as already sent. Very large delivery days now attach picking slips for the first 150 orders, and the email's subject line and PDF filename will tell you when that limit has been applied.

You'll now see it when a save fails

Previously, if saving a form failed — a dropped connection, or something the server rejected — the form could quietly go back to "There are unsaved changes" with no message, and your edit was lost without warning. Now every form across the platform shows a clear error message explaining what went wrong, and the save bar keeps showing that the save failed until you save successfully, so a lost change can't slip past you. Saving customer edits is also more resilient: if your connection drops mid-save, the change is automatically resent once you're back online instead of being discarded.

Delivery cut-off times now follow your business timezone

Your delivery and pickup cut-off time is now always worked out in your own timezone. Previously, if you hadn't picked a timezone under Settings > Delivery Schedule, some dates were calculated on east-coast time — so a Perth supplier with a 2:15pm cut-off could have orders pushed to the day after the one their customer expected, and repeating orders could land on a different date again. We now use the timezone you've selected, or, if you haven't selected one, the timezone of your business address. The timezone dropdown under Settings > Delivery Schedule shows which one is in use and no longer has a "Browser timezone" option — the date your customer sees at checkout is now the same one we put on the order, wherever they are ordering from.

Daily delivery email now retries instead of silently skipping a day

If your Daily Delivery Email (Settings > Features) didn't arrive because the send ran into trouble part-way through, we now try again a few minutes later instead of treating the day as already sent. Very busy delivery days with lots of orders and product photos are also much faster and lighter to prepare, so the picking slips and daily items PDFs come through reliably. And if you change the send time to something later in the day after that day's email has already gone out, we'll send it again at the new time rather than waiting until tomorrow.

29 August

Failed direct debits are always detected now

If you re-charged a customer's direct debit after an earlier one bounced, and that second attempt also bounced, we could miss it for up to a week. The order kept showing as Paid (Settling) on your Orders page, the customer kept seeing Payment Processing, the full amount still showed as paid, and if you use Xero the invoice stayed marked as paid — for money that never arrived. Nobody was emailed about the failure until the order eventually caught up days later. Every dishonoured direct debit is now recognised straight away: the order goes back to Unpaid with the amount cleared, the Xero payment is removed so the invoice shows as outstanding again, and you and your customer both get the Direct debit failed email at the time it actually fails. You can see the full history for an order under Payments > Payment errors. Genuine duplicate notifications from our payment provider are still ignored, so a single failure will never be counted or emailed twice.

Product and Customer reports no longer break on long date ranges

The Product Report and Customer Report under Analytics no longer fail on long date ranges. Previously, if you had a large product range or a lot of customers, picking a range of roughly six months or more could leave the table empty or stuck loading with no explanation, because we sent every single day of totals to your browser before adding them up. We now add the daily totals up on our side and send you just the finished rows, so these ranges load quickly. If a range is still too big for us to add up in one go, the report now tells you: it shows the most recent part of the range, says clearly that earlier days are not included, and leaves out products or customers it has no figures for instead of showing them as $0.00. Pick a shorter date range to get complete numbers. Totals for ranges that were already working are unchanged. The Inventory audit log now shows your 2,000 most recent entries and tells you when older ones have been left out, so that page loads for suppliers with long stock histories too.

AI website editor keeps the full conversation on long sessions

In Website, long editing sessions used to stop updating part way through — the assistant kept working on your site, but its messages and the list of files it was touching just stopped appearing in the chat. That's fixed: the conversation now continues to the end of the session no matter how much the assistant does. Very large tool results (like a whole file it just read, or a long build log) are now shortened in the chat with a note showing how much was left out, so the transcript stays quick to load and scroll.

Image uploads now recover from a failed upload

If an image upload failed - a dropped connection, a file the image server rejected - the uploader used to sit on a spinning wheel with no way back. The drag-and-drop area disappeared, so the only way out was to reload the page, which threw away everything you had typed into the form. Now, if an upload doesn't work, you get a message telling you what went wrong and which file it was, the upload box comes straight back, and you can drop the image again without losing any of your other changes. If you were adding several images at once, the ones that uploaded successfully are kept - only the failed ones need re-adding. This applies everywhere you add an image: products, product categories, product groups, inventory items, recipes, customers, your QR code, and your business logo.

28 August

Always set a delivery or pickup date on every order

Settings > Delivery Schedule now has an 'Always set a delivery date' (and 'Always set a pickup date') toggle. Turn it on and every order will have a date: if the customer doesn't choose one at checkout, the next available date from your schedule is selected for them automatically, respecting your available days, cut-off time, minimum days notice, excluded dates and any product minimum delivery days. The customer can still change it to another available date, but can't clear it. This applies everywhere orders are created - retail, guest and wholesale checkouts, the mobile app, orders you create on behalf of a customer, recurring orders and the API - so your delivery runs and delivery sheets are never missing a date. Leave the toggle off and nothing changes: the date stays blank unless the customer picks one.

27 August

Daily delivery email with picking slips and daily items PDFs

You can now get tomorrow's deliveries emailed to you automatically every day. When the Daily Delivery Email feature is enabled under Settings > Features, we'll send an email at your chosen time (Perth time) with two PDFs attached: the picking slips for every order being delivered tomorrow (one page per order), and a compact Daily Items report totalling the products across those orders. On days with no deliveries scheduled you'll receive a short 'no deliveries' email instead, so you always know the service is running. Ask the SupplyWise team to turn this on for you.

26 August

AusPost: Step-by-Step Setup Guide for MyPost Business & eParcel

There's now a public step-by-step guide for connecting your Australia Post account to SupplyWise, at supplywise.com.au/docs/auspost (also linked from Settings > Integrations > Australia Post). It walks you through both account types — MyPost Business (getting your merchant token from the MyPost Business dashboard) and eParcel Contract (registering for API credentials at the AusPost Developer Centre) — plus what to set up afterwards: parcel packages, shipping profiles with live AusPost pricing, and creating shipments, labels and manifests from the Orders page. Handy to forward to a colleague doing the setup, and it includes a troubleshooting section for the most common connection errors.

Send a shipped notification email from the orders table

You can now email your customer a shipped notification for an order, straight from the orders table — either for a single order or as a bulk action on a selection of orders. The email includes the order's tracking numbers (with clickable Australia Post tracking links) and a link to view the order. It's only ever sent when you choose to send it — marking an order as shipped doesn't send anything — and the table shows which orders have already had a shipped email sent, with a confirmation before sending one again.

Add tracking numbers to orders

You can now record one or more tracking numbers on an order, each with its carrier, from the order view page, straight from the orders table, or on the order screen in the mobile app. Once added, they show up on the invoice PDF and packing slip, and your customer can see them on their order and invoice pages too — so there's no more copying tracking details into emails. If you create Australia Post shipments through SupplyWise, the tracking numbers are filled in automatically when the labels are created. The carrier dropdown starts with the common Australian carriers and remembers any new carrier you type in, so it's there next time — and you can remove any suggestion you don't want from the list.

Choose whether to notify the customer when you edit an order

When you save changes to an order in Orders > Edit, we now ask whether you'd like to send the customer an updated order notification. Choose "Save & notify customer" to email them (and send an app notification) about the changes, or "Save without notifying" to update the order quietly. Previously, saving an edited order always notified the customer.

Xero: international account codes for GST-free overseas customers

If you sell to overseas customers marked as international GST-free, you can now keep their sales separate in Xero. In Settings > Integrations > Xero there are two new optional fields: International Sales Account Code and International Shipping Account Code. When set, every line on orders from international GST-free customers posts to those accounts instead of your usual product and shipping accounts, with the usual GST Free Income tax rate. Credit notes for those orders follow the same accounts. Leave the fields blank and nothing changes.

Xero: invoice lines now match your Xero items even when the SKU capitalisation differs

When SupplyWise sends an invoice to Xero, each line is linked to the matching item in your Xero organisation by comparing the product's SKU with the Xero item code. Previously this comparison was case-sensitive, so a product with SKU PLWR would not link to a Xero item coded PlWr — the line still synced, but without the item link or that item's sales account. SKUs now match your Xero item codes regardless of capitalisation, so those lines link correctly and pick up the sales account you've set on the item in Xero. No action needed on your side.

25 August

Block ordering for customers with overdue accounts

You can now block a wholesale customer from placing new web orders until they settle their account. Open the customer's page and turn on the new Ordering block switch in the right-hand column: we generate a statement of everything they currently owe, email it to their billing email, and their store shows that statement (payable by bank transfer — EFT or PayID) instead of the shop. The block lifts automatically the moment the statement is fully paid, or you can switch it off yourself at any time. Repeating orders are not affected. The switch is only available while the customer actually has an outstanding balance — if they owe nothing, there's nothing to block over.

24 August

Minimum order amounts now enforced correctly for pickup orders

Previously, a customer choosing pickup could sometimes place an order below your minimum order amount, because the checkout mistakenly counted a delivery fee the customer was never going to pay towards the minimum. Minimum order amounts (including the pickup-specific minimum you can set on each shipping profile under Settings, then Shipping) are now checked against what the customer actually pays, so pickup orders must genuinely reach your minimum before they can be placed.

Amount-based shipping profiles

You can now create shipping profiles where the delivery price depends on the order total (including GST, excluding shipping). Go to Settings > Shipping Profiles, create or edit a profile, and choose the new Amount-Based shipping type. Define price tiers for different order amounts (for example $0-$100 ships for $15, $100-$200 ships for $10), and optionally set a price for orders above your highest tier - if you don't, orders above it use the highest tier's price. Tier prices are entered excluding GST - GST is added at checkout, just like your other shipping prices.

Set a custom shipping amount on supplier-created orders

When creating or editing an order in Orders, you can now charge any shipping amount you like. In the Shipping section, turn on "Custom shipping price" and type the amount (including GST) — it replaces the calculated shipping price, including free-shipping thresholds, and you can set it to $0 to waive shipping entirely. The amount is remembered if you edit the order again.

Xero reconnect now shows your organisation

Reconnecting Xero from Settings → Integrations now works in one go: Xero's consent screen will list your organisation so you can select it and continue. Previously, if your organisation was already linked, Xero wouldn't offer it in the list and the reconnect appeared to do nothing. Your Xero settings and account codes are kept when you reconnect to the same organisation. If you've been seeing the amber reconnect banner, it should now go through smoothly.

20 August

Customers can now pay multiple orders at once

Your wholesale customers no longer have to pay orders one at a time. On their Orders page they can tick several orders and use Pay selected to pay them all with a single bank transfer: the page shows your bank transfer details (or PayID) and the customer's payment reference, and any payment quoting that reference is matched to their orders automatically, oldest first - even a partial payment covering only the oldest orders matches. The overdue-orders notification also offers a Pay all shortcut that opens the same page with everything overdue preselected. Statements work the same way: the statement email's View statement link opens a page with live paid/unpaid status for every invoice plus your bank transfer details and the statement's own reference, so one transfer settles the whole statement.

Send customers a statement of account

You can now send a wholesale customer a statement of account: one PDF and email listing every order they still owe you for, grouped into aging buckets (current, 1-30, 31-60, 61-90 and 90+ days past due), with your bank transfer details and a reference to quote. It's what a bookkeeper needs to pay a batch of your invoices in one go, instead of clicking through them one at a time. Open a customer and you'll find a new Statements tab. Send statement now generates a statement of everything currently unpaid and emails it to the venue's billing email, and every statement you've sent stays listed there so you can download the exact PDF the customer received. If a venue has no billing email yet, add one on the Venue tab first. To send to several customers at once, tick them on the Customers list and use Send Statements at the top - up to 50 at a time. Customers with nothing outstanding, or with no billing email, are skipped and the result tells you which and why. Customers > Statements shows every statement you've ever sent across all customers. Statements can also go out automatically each month. They are off until you turn them on: Settings > Statements sets a supplier-wide day of the month and time (the 1st at 6am is the usual choice), with an option to only send when something is actually overdue, and it shows you the next run date. You can also set a different day for one customer, or turn statements off for them entirely, from the Statements section on their Details tab. Emails are queued, so a large run can take a few minutes to fully go out.

Identity verification now updates itself

Settings > Identity Verification has been rebuilt. Before, the page gave you a Verify Now link and then had no idea what happened next — even after you'd passed, it could keep telling you verification was required until someone at SupplyWise marked you off by hand. Now the page tracks your verification from start to finish on its own. It tells you which status you're in — not started, in progress, under review, action needed, or verified — and updates itself the moment Stripe finishes checking your documents, with no refresh and no waiting on us. If a check doesn't pass, you'll see the reason in plain English, along with a Continue verification button that picks up where you left off, and you can retry as many times as you need. Once you're verified the page shows the date it happened, and the warning marker next to Settings in the sidebar clears itself. Verification is still handled entirely by Stripe: your ID and selfie go straight to them and are never stored by SupplyWise. It's needed before we can pay money out to your bank account, so it's worth completing if you haven't yet.

15 August

Xero: invoices now marked paid straight away, with simpler payout reconciliation

We're rolling out an improved way of recording SupplyWise payments in Xero. Once your account is moved across, each Xero invoice is marked as paid the moment your customer pays (instead of waiting until the payout reaches your bank), with the payment recorded against a new 'SupplyWise Clearing' bank account that we create in your Xero organisation automatically. At each payout, the transaction fee is recorded out of that clearing account and the net amount is transferred to your usual bank account, so the deposit in your bank feed matches a transfer and reconciles cleanly. To make this possible we need one extra Xero permission: if you see a 'Reconnect Xero' prompt in the sidebar or on Settings → Integrations, click Reconnect and approve — it takes about 30 seconds and none of your Xero settings change. Nothing else changes until we move your account across (we're doing this one supplier at a time); until then your payouts keep being recorded exactly as before. You can see which account is in use under Settings → Integrations (Xero settings), and Payments → Payouts shows the Xero transfer for each payout once you're on the new model.

14 August

International customers: GST-free pricing and invoicing

You can now mark a wholesale customer as international so they are priced and invoiced GST-free, as exports should be. To turn it on, go to Customers, edit the customer, and tick "International Customer (GST-free)" — the same option is available when approving a join request (it comes pre-ticked if the venue's address is overseas) and when sending a join invite. Once a customer is marked, everything follows automatically: the prices they see while browsing and in their cart, their checkout totals, order confirmations, invoices and PDFs, and the invoices synced to Xero or MYOB are all GST-free — no product changes needed. Shipping stays at the same charged amount, but its GST component is now correctly shown as zero on these orders, since international freight is GST-free. One thing to watch: only use this for customers whose orders you ship overseas — don't enable it for customers who collect from you in store, because goods picked up in Australia aren't exports and still attract GST.

Product pages now recognise items already in the cart

Fixed a bug where a product page could fail to notice that the product was already in the customer's cart. When it happened the quantity on the page showed as zero even though the item was sitting in the cart, and adding it again replaced the quantity already there rather than adding to it — so a customer who had 12 in their cart, came back to the product page and added one more ended up with 1. This affected products that have options (such as a size or a variety) where the option carries no extra charge, on both the web store and the mobile app, for all customers. Product pages, product grids and the cart now all agree about which cart line a product belongs to, so returning to a product page shows the quantity that is really in the cart and adding to it counts on from there.

App now checks delivery addresses are complete

The mobile app now checks that a customer's address is complete before it can be saved, matching the check the web app has always done. Previously the app only required the street line, so a customer could save a business with no suburb, no state and no postcode — and because delivery pricing is worked out from the postcode, an address saved that way could produce the wrong freight charge on their orders. This mattered most for overseas customers, where a missing postcode was easy to leave blank. The app now highlights whichever part is missing when a customer adds or edits a business, and when they place a delivery order. State and postcode are only required where the country actually uses them, so a UK customer isn't asked for a state and a Hong Kong customer isn't asked for a postcode. Customers collecting in store aren't asked to complete a delivery address, since nothing is being shipped to it.

Store product pages now show A$ prices for overseas customers

Prices marked as Australian dollars now start earlier in the shopping journey. Until now the A$ marking began at the cart, so an overseas customer browsing your store saw "From $50.00" and "$2.50" on your product list and product pages, then watched the same figures turn into "A$50.00" and "A$2.50" the moment they opened their cart. Product listing, product detail, variant and "You may also like" prices are now marked A$ too — on the web store and in the mobile app — for any customer who is signed in and whose delivery address is outside Australia. Nothing changes for Australian customers, and someone browsing without signing in still sees the plain price, because until they sign in or reach checkout we don't know where they are.

Overseas customers are no longer offered Australian-only payment methods

Direct debit, PayID, PayTo and EFT bank transfer all need an Australian bank account, so they are now hidden from customers whose business address is outside Australia. Those customers are offered card payment instead. Previously they were shown a BSB and account number field they could not fill in, or a PayID they could not pay to, and the order simply sat unpaid. This is based on the customer's own business address, not on where the order is being delivered, because it is the payer who needs the Australian bank account — an Australian customer having an order shipped overseas still sees all of your usual payment methods. You do not need to change anything: the methods you have switched on under your payment settings are unchanged, they are just not offered where they cannot work.

Payments: overseas cards now attract the international surcharge rate

Card payments are now rated by where the card was issued, not just by the card brand. A card issued outside Australia is charged the international rate of 2.80% plus 30c (excluding GST); Australian-issued cards are unchanged at 1.50% plus 30c, and Australian Amex at 1.75% plus 30c. Previously every card was rated as if it were Australian, which under-recovered the higher cost of an overseas card. If you pass card surcharges on to your customers, an overseas customer will now see and pay a larger card fee — it is shown on the order summary before they pay, and appears as the Card transaction fee line on the order and invoice as usual. If you absorb card fees instead, this is what you are charged on those payments. Which rate applied to a payment is worked out from the card number itself when the card is used, so nothing changes for you to set up, and any card we cannot confidently place is treated as Australian.

13 August

Addresses: overseas addresses now save, price and print correctly

Addresses outside Australia now work properly everywhere you and your customers enter them. Changing the country on an address clears the state and postcode instead of leaving the old ones behind — previously a customer who typed an Australian postcode and then switched the country to the United Kingdom kept that postcode, and the order was priced for shipping as if it were going to that Australian suburb. States and postcodes are now only required for countries that actually use them, so addresses in the UK, Hong Kong, the UAE and elsewhere can be entered and saved instead of being blocked by a state field their address doesn't have, and address search now returns suggestions for those countries. Addresses in countries with no state or postcode no longer print with a stray comma, such as "Dubai, " — only the parts that exist are shown. And a delivery address outside Australia now shows its country on the invoice PDF, the picking slip, printed orders and delivery run sheets, so whoever packs and ships the order can see where it is going. Australian addresses look and behave exactly as they did before.

Guest checkout now shows the card fee before payment

If you pass on card surcharges, guests checking out without an account now see that fee before they pay. The order summary shows a Card fee line from the start, with the range it can fall in, and as soon as the customer starts typing their card number it switches to the exact fee for that card and the pay button reads the real amount, for example Pay $516.23. Previously the fee was added when the card was charged but never shown, so the total on screen was lower than the amount that left the customer's account — that gap is larger now that overseas cards are charged the international rate. Nothing changes for you if you absorb card fees instead of passing them on.

International customers now see prices marked as Australian dollars, with an approximate conversion

If a customer's delivery address is outside Australia, the order totals and prices on their checkout, payment and order screens are now marked as A$123.45 instead of $123.45, with a short note under the order total reading "All prices are in Australian dollars (AUD)." Cart pages are marked the same way, using the delivery country already held against the customer's account, so the price doesn't change appearance between the cart and the checkout; a guest browsing without an account still sees the plain price until they enter a delivery address at checkout. This removes the ambiguity for overseas customers, who would otherwise reasonably assume a dollar figure was in their own currency. Underneath the order total they also see a rough figure in their own currency — for example "A$375.54" followed by "≈ £190.30" — calculated on the amount they actually pay, including shipping and any card fee, so they can sanity-check the cost before paying. Where a currency also uses a dollar sign, we add the currency code so it can't be mistaken for Australian dollars again, for example "≈ $190.30 USD". The note explains that the converted amount is approximate and that their bank sets the final rate. The conversion only appears when we have a recent exchange rate for that country's currency; otherwise customers simply see the A$ price. Nothing changes for Australian customers, and nothing changes about what you charge: orders are still priced, billed, invoiced and synced to your accounting system in Australian dollars exactly as before. Invoices already show an "Amount AUD" column, so they are unchanged. Works on both the web store and the mobile app.

Invite up to 500 customers to your store at once

The Invite button in the top right of your dashboard used to send to one customer at a time, so inviting a whole customer list meant filling in the same form over and over. It now takes as many as you like in one go, up to 500. Pick Wholesale or Retail as before, then either type recipients in one by one, paste a list straight from a spreadsheet or your address book (names and emails, in most common layouts), or drag in a CSV file. You'll see a count of how many are ready to send along with any addresses that are misspelled or listed twice, and you can fix or remove those in place before sending — bad rows are simply left out rather than blocking the send. There's also an optional personal message that gets included in the invitation. Every recipient receives their own separate email addressed only to them, so nobody sees who else you invited. Large batches are queued and delivered over a few minutes rather than all at once, which keeps them out of spam folders. The same invite dialog is available from Customers > New Customer > Invite.

Payments: declined cards now say why when adding a payment method

Saving a new card or bank account runs a quick verification with the bank, and until now a decline at that step (an expired card, a wrong CVV) showed a wall of raw technical output that looked like the system had broken. Now it reads in plain English — for example "Payment failed. Decline for CVV2 failure. Please use a different card or contact your bank." — the same clear wording declined payments already get. This covers your customers adding a card or direct debit account in their store's payment settings (web and mobile app), and you saving a card on a customer's behalf under Customers > edit customer > Payment Methods, where the advice is worded for you ("Ask the customer to…"). Nothing to set up.

Repeating order setup now shows clear validation messages

When saving a repeating order (Customers > Repeating, or your customers' own repeating order page), the form now checks your schedule before saving and tells you exactly what needs fixing — for example a missing frequency — instead of failing with a generic error. We also fixed a rare issue where the frequency could be silently cleared while editing, which made saving impossible.

Retail customers can view and print their invoices again

We fixed an issue where retail customers who opened an order's invoice from your retail store saw an error page instead of the invoice. Your retail customers can now open and print their tax invoice from their order page as usual — no action needed on your side.

12 August

Restocking a product brings back its archived inventory item

Previously, if an inventory item was archived (from Inventory, or by turning a product's Track switch off), it disappeared from your Inventory page and there was no way to get it back — typing a new Stock Level on the product quietly created a brand-new item, losing the old item's stock history. Now, when you enter a Stock Level on a product whose linked item was archived (in the product's Inventory card, or straight into the Stock column on the Products page), the original item is automatically restored with its full audit history, and the change is recorded as a manual stock reset. Nothing to configure — just set the stock level and the item reappears on your Inventory page.

11 August

Archived customers no longer appear in customer groups and price lists

When you archive a customer, they are now hidden from your customer groups and price lists automatically. This applies to customers you archived in the past as well as any you archive from now on, so the customer and venue names you see under Customers > Customer Groups and under Price Lists only ever show your active customers. If you unarchive a customer, they will reappear in any groups or price lists they still belong to.

10 August

Shipping labels stay downloadable after AusPost's 24-hour reprint window

Australia Post only lets us re-download a shipping label for 24 hours after it's created — clicking Label on an older order used to fail with an error. SupplyWise now saves a copy of each label PDF when it's created, so the Label button on the Orders page keeps working no matter how old the shipment is. If AusPost can no longer re-issue a label, the saved copy opens instead (you'll see a note when this happens). Labels created before this change that are already past the 24-hour window can't be recovered, but everything from now on is kept.

Customers now receive AusPost tracking emails

When you create AusPost shipments from the Orders page, Australia Post now emails your customer their tracking details directly. Previously the consignment carried the customer's email address but Australia Post wasn't asked to send the notification, so customers received nothing. No setup is needed — any order with a customer email address gets the tracking email automatically when you ship it.

7 August

Friendly page for old or mistyped store links

If a customer follows an old bookmark, an out-of-date search result or a mistyped link to a store address that no longer exists, they now land on a clear 'Store not found' page with a link to get in touch, instead of the generic error screen they used to see. Your own store links are unaffected - this only changes what happens when the address doesn't match a store.

Payments: declined card payments now say why

When a payment is declined, the reason is now shown in plain English. Previously only one reason — insufficient funds — was spelled out; every other decline showed a wall of raw technical output that looked like the system had broken. Yesterday a customer's card had simply expired, and neither they nor their supplier could tell that from the message. Now a decline reads like "Payment failed. Expired card. Please use a different card or contact your bank.", whatever the bank's reason was, so your customer knows immediately whether to try another card or ring their bank. This covers your customers paying an order by card or direct debit — wholesale and retail, on the web and in the mobile app — your own SupplyWise invoices under Settings > Billing, and you charging a customer's saved card or direct debit yourself from the order screen (open the order > Charge Card) — where the message is worded for you, as in "Ask the customer to use a different payment method". Guests paying by card on your retail store see the bank's reason too. Nothing to set up.

Order push notifications no longer switched off by the Order Emails setting

If you had turned off the Order Emails switch in Settings > Features, you were also silently missing the push notifications the mobile app sends your team when a new order comes in. That was never intended: the switch is described as controlling emails only. Order Emails now does exactly that, so anyone on your team with the SupplyWise app installed and notifications allowed will get an alert on their phone the moment an order is placed or updated, whether or not you receive the email copy. Nothing to turn on — if you had the switch off, your push notifications will simply start arriving again. To stop getting them on a particular device, turn notifications off for SupplyWise in that phone's own settings.

Clearer error messages for Apple Pay and Google Pay at checkout

If a customer's Apple Pay, Google Pay or Link payment failed on your retail store's checkout, they previously saw no explanation — the payment sheet just closed. The error message now appears right below the express payment buttons, so customers know what went wrong and can try again or pay by card instead. This should reduce abandoned checkouts after a failed wallet payment.

Route planning shows progress while orders are sent to OptimoRoute

In Orders > select orders > Plan Routes, the Create OptimoRoute Orders button used to look like nothing had happened after you clicked it — orders are sent to OptimoRoute one at a time, so with a big selection it could sit there for a while with no spinner, no message and nothing greyed out. Some people understandably assumed the click hadn't registered and left the page part-way through. The button now shows a spinner and tells you what it's doing ("Sending 22 orders to OptimoRoute…"), counts up the seconds if it's taking a while, and is disabled until the sync finishes so you can't accidentally send the same batch twice. A note under the button reminds you to keep the page open until it's done.

6 August

Product form edits are now saved more reliably

Some suppliers found that a price or weight they had just typed on the product form could quietly revert, so the Save button said there was nothing to save. Edits you type now register immediately — if you change a price and hit Save straight away, it sticks. If you had a product edit mysteriously not take effect recently, it should behave now. Three related fixes on the same form: Reset now clears what you typed out of the price and weight boxes as well as out of the form, a weight is no longer wiped while you are part-way through typing it (like the moment after "2."), and a price shown excluding GST no longer drifts by a cent just because you clicked into the field and back out without changing it.

Changelog: updates now grouped by day

This changelog page now breaks each month down by day, so you can see exactly when a change landed and quickly spot what's new since you last looked. Only days with updates are shown. Entries from before we started tracking days still appear under their month as before.

Hold the + button to set bulk quantities faster

Customers ordering in bulk no longer have to tap + fifteen times. In your store and cart, pressing and holding the + or - button now counts the quantity up or down continuously, and the quantity box itself is now white so it's obvious you can tap it and type a number straight in. Behind the scenes each burst of taps now saves once with the final quantity instead of saving on every tap, so quantities keep up on slower connections, and if a quantity fails to save your customer now sees a message and the correct number instead of a figure that was never saved.

Card payments now accept names with apostrophes and accents

Customers whose name contains an apostrophe, a hyphen or an accent — O'Connor, Smith-Jones, José — could not pay by card. Our payment provider rejected the cardholder name, and the checkout only told them to try again, so the payment failed every time until they guessed to retype their name differently. This affected your retail and guest checkouts, your wholesale customers saving or paying with a card at checkout (on the web and in the mobile app), and adding a card in your own billing settings. We now tidy the cardholder name automatically before sending it on, so those payments simply go through. Nothing changes for you or your customers at the checkout — the name may just appear on the saved card without its punctuation or accents. If a card is ever declined for a different reason, the checkout now says which detail was rejected instead of a generic please try again.

5 August

Actions column no longer sticks on mobile

The Actions column stays pinned to the right hand edge of tables like Orders, Products and Customers so the row buttons are always in reach. On a phone that pinned column was taking up too much of the screen, leaving very little room to read the rest of the row. On smaller screens the Actions column now scrolls along with everything else, so you get the full width for your data and simply swipe across to reach the buttons. On tablets and desktop it stays pinned exactly as before.

Tables: columns you hide now stay hidden

On the Orders and Audit Log tables, unticking a column under the Columns button used to hide it until you reloaded the page, at which point it came back. Your choice now sticks, so you can trim those tables down to just the columns you care about and they'll stay that way next time you visit. Your customers see the same fix on their orders list. Columns we add in future still appear automatically, so you won't miss anything new.

Fixed: Sidebar Notification Badges Disappearing After A Network Blip

The counters and warning dots in your dashboard sidebar — unread messages, join requests, unmatched payments, purchase orders ready to send, payment errors and the payout-account warning — could all vanish at once and stay gone until you reloaded the page. It happened when your connection dropped for even a moment while the page was checking your payout account: that one check never finished, and the sidebar kept waiting for it instead of showing the rest. The check now retries by itself, and if it still can't get through, the other badges appear anyway rather than the whole set staying hidden. Nothing was ever wrong with the underlying numbers — you just couldn't see them.

Fixed: A Blank White Page Instead Of The Error Screen

When something went wrong — anywhere in your dashboard, or for a customer browsing your store — you could land on a completely blank white page with no way forward except the browser's back button. The cause was that the error screen itself tried to reload the same information that had just failed, so it fell over too. The error screen is now self-contained and always appears properly, with a "Try again" button that retries without losing your place, a full refresh as a fallback, and links to your account, support and sign out. Nothing about your orders or data was ever at risk — this only changes what you see when an error happens.

AusPost: Shipping Options Now Show At Checkout For Heavy, Multi-Box Orders

If an order was too heavy for one box, we split it evenly across several — and when the weight didn't divide neatly (say 25kg across three boxes), Australia Post rejected the quote and your customer was shown no delivery options at all, with no way to finish the order. Australia Post accepts weights to the nearest gram, and we were sending a far longer number than that. Weights are now rounded to the gram everywhere we talk to Australia Post, at checkout and when the shipment is lodged, so those orders quote and ship normally. Nothing changes for you, and nothing changes about what you're charged — a gram either way is what Australia Post prices on anyway.

Xero: You'll Now Be Told When Your Connection Needs Renewing

If Xero disconnects SupplyWise — which happens if access is revoked at the Xero end, or the connection simply expires — your invoices quietly stopped syncing while Settings > Integrations still showed Xero as connected, so there was nothing to tell you anything was wrong. The Xero panel now shows an amber "Reconnect required" badge with a Reconnect Xero button as soon as we detect it, and reconnecting picks up where you left off with your account codes and settings kept exactly as they were. Any orders raised while the connection was down won't have reached Xero — after reconnecting, open those orders and use the Xero sync button at the bottom of the order to send them across.

AusPost: Returns Services No Longer Appear As Delivery Options

If your Australia Post contract includes a returns service — names like "Eparcel Post Returns" or "Express Eparcel Post Returns" — it was being offered in the same dropdowns as your normal delivery services: your Default Shipping Product in Settings > Integrations, your shipping profiles, and the service picker when creating shipments. Returns services can only be used when a customer sends something back to you, so if one was picked, Australia Post rejected the shipment and it couldn't be created until you noticed and switched the service by hand. Returns services are now left out of all three of those pickers, so only services you can actually send parcels with are shown. If one was already saved as your default, we'll move you across to a standard Parcel Post service automatically — never to a more expensive Express service — and if an order still has one set, the Create Shipments screen now tells you before you send it to Australia Post rather than after.

Orders: Type Quantities Straight Into The Order Form

When building or editing an order, the quantity box next to each product now selects its contents as soon as you click it, so you can type the number you want instead of clicking the + button over and over or clearing the box first. The box also shows a text cursor when you hover it, making it clearer it's something you can type in. This matches how the quantity boxes already work in your customers' stores.

AusPost: Clearer Message When Labels Can't Be Downloaded

Using Bulk Actions > Download AusPost Labels on orders that don't have a shipment yet showed an unhelpful "Server Error" with a reference code, which made it look like something had broken. It now tells you what's actually wrong — for example that none of the selected orders have an AusPost shipment yet — so you know to create the shipments first.

AusPost: Several Labels Per A4 Sheet Is Now The Default, And Works For Express Post

Printing several labels to an A4 sheet is now the standard setting — the layout option is simply "A4 — multiple labels per page", and it's what you'll get unless you've picked something else. Behind the scenes it prints four to a page for Parcel Post and three to a page for Express Post, which is what Australia Post actually supports: Express Post labels are taller, so only three fit a sheet and there's no four-per-page option for them. Previously choosing "A4 — 4 labels per page" asked Australia Post for a four-up Express Post sheet that doesn't exist, which could stop your Express Post labels printing at all. If you've already set a layout in the print dialog, your choice is kept — including one label per page if that's what suits your printer — and you can change it any time from the same dialog. One thing worth knowing about Express Post: Australia Post requires that black-and-white labels be supplemented with the yellow Express Post mini-labels or tape so parcels get streamed into the Express network.

4 August

Tables: The Actions Column Now Stays Put When You Scroll Sideways

On wide tables like Orders, Products and Customers you had to scroll all the way back to find the row's buttons — download the invoice, duplicate, delete, and so on. The Actions column is now pinned to the right hand edge of every table, so those buttons stay in view no matter how far across you scroll, and a soft shadow shows when there are still columns hidden underneath. The pinned column always sits last, even if you've dragged your columns into a different order, and it still highlights with the rest of the row as you hover. Nothing else about the tables has changed — and if you don't need the buttons at all, you can still untick Actions under the Columns button.

AusPost: Dismiss The "Awaiting Manifest" Banner When You're Not Ready

The amber banner on your Orders page listing AusPost shipments that were created but never manifested can now be closed — click the × next to the "Create Manifest" button and it will go away, so it isn't sitting there all week if you're deliberately holding those parcels back. It won't stay hidden forever, though: as soon as a shipment is created for another order that still needs manifesting, the banner comes back listing it, so nothing quietly slips through. Dismissing is remembered on your device only, and the banner still disappears on its own once the manifest is created.

Tables: A Tidier Layout With Filters On Their Own Row

The tables across your dashboard — Orders, Products, Customers, Inventory, Price Lists, Payouts and the rest — have been given a cleaner layout. The filter buttons used to sit off to the right of the search box; they now sit on their own row directly underneath it, lined up on the left, so they're easier to scan and don't get squashed when you have a few of them. Spacing between the search box, the filters and the table itself is now even throughout. Page headings have also moved up into the bar at the top of the screen alongside the breadcrumb trail, which frees up room for the table and makes it clearer where you are — for example Customers > Credit Notes. Nothing about how searching and filtering works has changed.

Products: See And Edit Descriptions Straight From The Products Table

Your Products table now has a Description column, sitting next to the product name. It shows the first line of each description so the column stays narrow — hover over it to read more in a pop-up, and click it to open the full description in an editor with the same formatting tools (heading, bold, italic, and the HTML view) you get on the product page. Save with the Save button or Cmd+Enter on a Mac / Ctrl+Enter on Windows. Products without a description show a faint "Add description" you can click to write one, and there's a new filter on the column so you can pull up everything still missing a description — handy before opening a new store. The column is searchable and comes through in your table exports too. If you'd rather not see it, untick it under the Columns button below the table.

AusPost: A Banner Now Reminds You About Shipments Awaiting Their Manifest

When creating AusPost shipments you can click "Close (manifest later)" to finish the manifest another time — but there was no way to find your way back: nothing showed which orders had un-manifested shipments, and the only path was to re-select the exact same orders and run Create AusPost Shipments again (which few people would guess). Now, whenever you have shipments that were created but never manifested, an amber banner appears at the top of your Orders page listing the order numbers, with a "Create Manifest" button that takes you straight back to the manifest step for all of them. Remember: postage isn't charged and labels aren't generated until the manifest is created, so if the banner is showing, those parcels aren't ready to hand to the driver yet. The banner disappears automatically once the manifest is done.

AusPost: Choose Your Label Layout (A4 Or Thermal) Before Printing

You can now choose how your AusPost shipping labels are laid out every time you print them, wherever labels are generated. Pick from A4 with one label per page, A4 with four labels per page, or the A6 format for thermal label printers. When you click "Label" on an order in the Orders table, or use Bulk Actions > Download AusPost Labels, a small dialog now asks for the layout first; when creating shipments, the same options appear on the manifest step (labels are generated when the manifest is created). eParcel accounts also get an "Include AusPost branding" tick-box — untick it if you print onto purchased AusPost stationery that already carries the branding (MyPost Business labels are always branded, an Australia Post rule). Your choice is remembered on your device, so once it matches your printer you can just click straight through.

AusPost: Re-download A Manifest PDF Any Time From The Orders Page

Previously the Manifest PDF (the AusPost Order Summary you print and hand to your driver) could only be downloaded on the final screen of the shipments dialog — once you closed it, there was no way to get the manifest back. Now every manifested order in your Orders table has a "Manifest" link in the AusPost column, right next to the existing "Label" link. Click it and the manifest for that order's batch opens in a new tab, ready to print — fetched fresh from Australia Post, so it works no matter how long ago the batch was lodged. Any order from the batch gives you the same manifest, since all orders lodged together share one Order Summary.

Messages: Write Longer Messages With Proper Paragraphs

The message box on the Messages page was a single line that scrolled sideways as you typed — you couldn't see what you'd written, and pressing Enter fired the message off half-finished. It's now a box that grows as you type, wrapping onto new lines so your whole message stays visible (it starts scrolling once it gets to about eight lines). Enter now starts a new line, so you can lay a message out in paragraphs; send with the Send button, or with Cmd+Enter on a Mac / Ctrl+Enter on Windows. Line breaks are kept in the sent message, so a list of items reads as a list rather than one long run-on sentence.

Orders: Fixed An Error When Viewing Orders Across The Turn Of The Month

If you had the Orders page open right as a new month began (midnight UTC — early morning in Australia), the order list could suddenly fail with an error and only come good after a full page reload. This was a behind-the-scenes issue with how the list loads orders in pages: the start of a new month invalidated the pages you already had open. It's now fixed — the Orders page keeps working smoothly across the month boundary, with nothing for you to do.

Route Planning: Orders No Longer Sync To The Wrong Day In OptimoRoute

When you sent orders to OptimoRoute (Orders > select orders > Plan Routes > Create OptimoRoute Orders), the delivery date could land one day late depending on the time of day you clicked the button — in Perth, anything sent after 8am went onto the next day's route plan, even though the date shown on screen was correct. Worse, re-sending the same order didn't fix it: OptimoRoute treats an order with a different date as a brand new one, so you'd end up with the same delivery listed on two different days. The date you pick is now sent exactly as shown, at any time of day. If you've synced routes recently, it's worth a quick scan of tomorrow's plan in OptimoRoute for deliveries that are also on today's — delete the copy on the wrong day.

3 August

AusPost: Label And Shipment Failures Now Tell You What Went Wrong

Occasionally Australia Post's systems return a garbled response instead of a proper answer — their gateway having a moment, not anything wrong on your side. When that happened while you were downloading labels (Orders > select orders > Bulk Actions > Download AusPost Labels) or creating shipments, all you saw was a generic "Server Error", with no way to tell whether the problem was your orders, your AusPost account, or just bad luck — and no hint that simply trying again usually works. Now the error tells you what actually happened (for example that Australia Post returned an unreadable response, and which kind of failure it was), so you can retry with confidence instead of abandoning the shipment. Nothing changes when things work — this only affects what you see when Australia Post misbehaves.

Payments: Charging A Customer's Card Now Shows A Clear Message When It's Declined

When you charge a customer's saved card from an order (open the order > Charge Card) and their bank declines it — most commonly insufficient funds — the message you saw was a wall of raw technical output that looked like something had broken. It hadn't: the charge simply didn't go through. You now see the same clear "Payment failed. Insufficient funds" message your customers see when their own payment is declined, so you know straight away it's a bank decline and can follow up with your customer rather than wondering if the system failed.

Wholesale Store: Customers Can Now Type A Quantity Instead Of Tapping "+" Dozens Of Times

On your wholesale product list (and on product pages), each product has a quantity box with a minus and a plus button either side. The box has always been typeable — but it didn't look it, because clicking it gave no visible response at all. So customers ordering in wholesale quantities were tapping "+" over and over, one unit per tap, rather than typing the number they wanted. Clicking or tapping the quantity box now highlights it with a clear outline and selects whatever's already in it, so your customer can just type 24 and move on. The minus, plus and remove buttons also now have proper labels for screen readers. Nothing to set up — your customers will see this straight away, and it should make large orders noticeably quicker to put together.

Users: Removing A User Now Tells You Why When It Can't Be Done

Previously, clicking the red bin icon to remove a user (Settings > Users, or the Users section of a customer page) could appear to do nothing at all — you'd confirm, the dialog would close, and the user was still there with no explanation. This happened when the removal wasn't allowed, most commonly trying to remove yourself while you're the business's only owner (someone has to stay in charge of the account). You now see a clear message explaining exactly why the removal was blocked, and the bin icon no longer appears on your own row when removing yourself isn't possible — note that a teammate who hasn't accepted their owner invite yet doesn't count as another owner until they've joined. We also fixed the reverse problem: a non-owner team member removing themselves from a business was sometimes wrongly blocked by the same owner check even though another owner existed — that now works.

AusPost: Creating Shipments Now Opens A Full Page Instead Of A Cramped Pop-up

Creating Australia Post shipments (Orders > select orders > Bulk Actions > Create AusPost Shipments) now opens a full page rather than a pop-up window. With more than a handful of orders selected, the pop-up's table could overlap its own footer and squash the bottom rows together, and you had to scroll inside a small box within the window. The new page gives the order list the whole screen: one normal page scroll, every row and its parcels visible, and the Cancel / Create buttons always in view at the bottom. Everything works the same as before — review each order's weight, product, package, signature and extra cover, then create the shipments and continue to the manifest step. You can also share or bookmark the page link, since your selected orders are part of the address.

Payments: You're Now Told When A Customer's Direct Debit Bounces

When a customer's direct debit was dishonoured by their bank, nobody was told. The order simply reverted to unpaid in the background — no email to you, no email to your customer — and because direct debits are never retried automatically, it could sit there unnoticed for weeks while you assumed the money was on its way. Now the moment a debit fails, both you and your customer get an email showing the order, the amount, and the most likely reason (a plain dishonour is almost always insufficient funds at the time the debit was presented). Your customer's email has a Pay Now button so they can settle it as soon as funds are available; yours links straight to the order so you can chase it or charge it again. These failures were always recorded under Payments > Payment Errors — they're now impossible to miss. Separately, if a failed debit was ever missed entirely, the order could stay stuck showing the blue "Paid (Settling)" badge forever — appearing paid to you and to your customer, and never being disbursed. Our daily check now catches those and correctly returns them to unpaid, so what you see on the Orders screen matches what's actually happened to the money. Nothing to set up.

Payments: Failed Automatic Payments Now Retry Instead Of Silently Giving Up

Until now, automatic payment only ever tried an order once. If your customer's direct debit bounced — or the attempt was skipped for a passing reason like a connection hiccup — that order was quietly dropped from automatic payment forever, and no more payment reminders were sent either. It would only get paid if you noticed it sitting unpaid and chased it yourself. Now a failed or bounced attempt is retried automatically about a week later, up to three attempts in total, and your customer receives a payment reminder with each failed attempt so they can settle it themselves sooner. Orders skipped for temporary reasons are simply picked up again the next day rather than counting as an attempt. Nothing to set up — this applies to new orders from today.

Payments: A Red Badge Now Shows New Payment Errors In The Sidebar

Failed payments — like a customer's bounced direct debit or a declined card — have always been recorded under Payments > Payment Errors, but nothing told you to look there. Now a count badge appears on Payments and on the Payment Errors entry in the sidebar whenever there are errors you haven't seen yet, just like the existing badge for unmatched payins. Opening the Payment Errors page clears it. The badge is per-person, so you clearing it won't hide new errors from your teammates.

Payments: Direct Debits Now Show As "Payment Processing" To Your Customers Until The Money Clears

A direct debit takes a couple of business days to clear, and unlike a card payment it can still bounce after being submitted. Previously your customer saw a green "Payment Complete" the moment they placed a direct debit order — so if the debit later bounced, they'd already been told the order was paid. Customers now see an amber "Payment Processing" on those orders (in their order history, order pages and confirmation emails) until the funds actually clear, at which point it turns into the usual paid confirmation. The PDF tax invoice does the same: instead of a green "PAID" badge, it shows "PAYMENT PROCESSING" until the debit clears, so an invoice generated while the money is still in flight no longer overstates things. Card payments are unchanged, and what you see on your side — the blue "Paid (Settling)" badge — is unchanged too.

Payments: One Confirmation When Ordered, One Receipt When Paid — No More Duplicates

If an order was charged again after a failed payment — for example re-charging a customer whose direct debit bounced — your customer received a fresh order confirmation email each time, identical to the first, with no hint anything had gone wrong in between. Customers now get exactly one confirmation when the order is placed and one receipt when it's paid; re-charging an order that was already confirmed no longer re-sends it. Emails you trigger deliberately — like the order notification and ready-for-pickup buttons — always send. We also fixed a rare but serious edge case where, if recording a successful direct debit hit an internal error, automatic payment could go on to charge the customer's card as well: the fallback now recognises the debit already went through and stops, and our team is alerted to reconcile it.

AusPost: Shipping Quotes Now Cover Australia Post's Fuel Surcharge

If you ship on an Australia Post eParcel contract, you were quietly losing money on every parcel. (MyPost Business accounts aren't affected — Australia Post doesn't bill a separate fuel surcharge on those.) Australia Post adds a fuel surcharge — currently around 12% — to what it bills your account, but its pricing service doesn't include that surcharge in the price it quotes, so the shipping your customer paid was consistently short of your real cost. On a recent $10.05 parcel, for example, the customer was charged $11.06 while Australia Post billed $12.42. Checkout quotes now include the surcharge, so the shipping your customer pays covers what you'll actually be billed. We work your surcharge rate out from your own shipments rather than a fixed number: each time you create Australia Post shipments (Orders > select orders > Bulk Actions > AusPost), Australia Post sends back the surcharge it charged on them, and your rate is updated from that — so it stays accurate by itself as Australia Post moves the rate, and there's nothing to set up or maintain. Because it's worked out from your own bills, the surcharge starts being added to your quotes once we've seen three billed Australia Post shipments whose cost breakdown from Australia Post adds up cleanly (a few responses don't, and those are skipped) — until then quotes stay as they are, so don't be surprised if a brand new Australia Post account doesn't show it straight away. One related fix: the "AusPost" cost shown in that same shipments dialog now shows the true amount billed including the surcharge, so the Shortfall/Surplus figure against what your customer paid is finally telling you the truth — previously it looked square when you were out of pocket. If you've been shipping with Australia Post for a while, it's worth comparing a recent order's shipping against your Australia Post invoice to see the difference.

All months

See SupplyWise in action

Book a demo and we'll show you how SupplyWise takes the admin out of your wholesale ordering.

Book a Demo